Målomformere
JUMO dTRANS T06 - Multifunctional Four-Wire Transmitter in Mounting Rail Case (707071)
- Universal input for a large number of sensors and standard signals
- Intuitive operation and configuration on the device or through USB interface with setup program
- RS485 interface (Modbus RTU) and relay output limit value (option)
- Intelligent additional functions such as min./max. drag indicator, operating hours counter, and output simulation
- SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to DIN ISO 13849 (option)
- Sensor matching for RTD temperature probes
- Customer-specific linearization
- High galvanic signal separation
- Service and operation hours counter
- Connection diagram retrievable in the display
JUMO dTRANS T06 Ex – Multifunctional Four-Wire Transmitter in Mounting Rail Case with SIL and Ex Approval (707075)
• Universal input for a large number of sensors and standard signals
• SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to ISO 13849
• Reliable operation through sensor monitoring and hardware error detection
• ATEX and IECEx approval
• Customer-specific linearization
• Intuitive operation and configuration on the device or via USB interface with setup program
• RS485 interface (option)
• Intelligent additional functions such as min./max. drag indicator, operating hours counter, and output simulation
• Connection diagram can be viewed in the LCD display
JUMO dTRANS T07 - 2-Kanal-Måleomformer med HART®/Ex/SIL (707080)
- 2 standard måleinnganger(RTD, TC, , mV)
- Høy nøyaktighet (0,1 K med Pt100 sensor)
- Utgang 4 til 20 mA (1-kanal, Loop-drevet)
- To innbygningsutførelser (B-head eller DIN-skinne)
- HART 7 protokoll med forlengelse for "Secure HART®"
- SIL 2/3 hardware / programvare iht. IEC 61508
- Pålitelig måleverdi ved hjelp av overvåkningssensorer og enhetens maskinvare feildeteksjon
- Alternativ plug-in display for B-head versjon
JUMO Ex-i Isolating Switch Amplifier – Two-Channel Isolating Switch Amplifier for Ex Applications (707540)
- Intrinsically safe inputs for contacts or NAMUR proximity sensors
- 2 channels
- Output: 1 changeover relay per channel
- Galvanic three-way isolation
- Wide-range power supply
- Line fault detection (line break, short circuit)
- Configuration with DIP switches
- Phase reversal option (switching output)
- Coded screw terminals for conductor cross sections from 0.2 to 2.5 mm²
- Extended ambient temperature range from -40 to +60 °C