More than sensors+automation

JUMO TYA S202 – Three-Phase Thyristor Power Controller for Burst-Firing Operation in Economy Circuit (709066)


  • LCD display with info line
  • Simple configuration of the device through plain text display in national language
  • Setup program for configuration via USB interface
  • Transmission of the setup data is possible even without voltage supply to the device (USB port supplies power)
  • Close-density mounting possible
  • Network load optimization through dual energy management
  • RS422/RS485 interface or
  • PROFIBUS interface for connecting to process control systems
  • Soft start function with pulse groups
  • All versions feature protection type IP20
  • Load monitoring for the detection of partial load failure or load short-circuit "Teach-In"
  • Integrated diagnostic systems (e.g. rotating field detection)
  • UL 508 approval

Kunde fordeler

  • Quick startup times
  • Reduction in operating costs
  • A power controller for all load types
  • Precise device diagnosis
  • Overview of energy consumption


  • Industrial furnace construction
  • Drying plants
  • Glass industry
  • Plastics processing


The JUMO TYA S200 series is the new cost-optimized power controller series for controlling single-phase and three-phase loads. The load is controlled through pulse group control. The microprocessor controlled power controller displays all parameters in an LCD display with
background lighting. It can be operated using the 4 keys at the front. Thyristor power controllers are used where larger resistive and resistive inductive loads have to be switched (e.g. in industrial furnace construction and plastics processing). The thyristor power controller consists of antiparallel switched thyristors, the insulated heat sink, and the control electronics. Thyristor power controllers up to a load current of 50 A can either be clipped to a 35 mm mounting rail or fitted to the wall on a mounting plate. Devices with a load current greater than 50 A can only be mounted on the wall. For control of transformer loads, the phase angle of the first half-wave can be cut to reduce the inrush current. All thyristor power controllers have a built-in semiconductor fuse. The option of specifying a base load is available. A soft start can be set to avoid high inrush currents. The thyristor power controllers meet the operating conditions of DIN EN 50178. Grounding of the device has to occur in accordance with the regulations of the responsible energy supply company.


Tilbehør artikler

Artikkelnummer Produkt beskrivelse Priser
USB-Kabel, A-Stecker auf Mini-B-Stecker, Länge 3m På förfrågan
Montagesatz Hutschiene 90mm 709062 20A På förfrågan
Montagesatz Hutschiene 120mm 709062 32A På förfrågan
Montagesatz Hutschiene 160mm 709062 50A På förfrågan
Halbleitersicherung (I-Bem. 40A) På förfrågan
Halbleitersicherung (I-Bem. 80A) für 32A und 50A Thyristor- Leistungssteller På förfrågan
Halbleitersicherung (I-Bem. 160A) für 100A Thyristor-Leistungssteller På förfrågan
Halbleitersicherung (I-Bem. 350A) für 150A Thyristor-Leistungssteller På förfrågan
Halbleitersicherung (I-Bem. 550A) für 200A und 250A Thyristor-Leistungssteller På förfrågan
Vorkonfiguration (Service) På förfrågan
Service-Einsatz På förfrågan