Impeller flow rate sensor (type 40.6020)
Funksjons
- Simple installation
- For pressures up to PN10 and temperatures up to +70°C
- Frequency pulse signal suitable for direct connection to a PLC
Kunde fordeler
Flexible and straight forward
The flow rate transmitter can be fitted to and removed from any pipe/tube diameter (DN15 to DN400) without restrictions.
Applikasjoner
- Flow rate control (fresh water, waste water, irrigation)
- Flow measurement (water meter)
- Pump protection, pump control (fluid)
- Dosage/metering in of chemicals (CIP systems)
- Dosage/metering (irrigation)
Beskriving
The impeller flow rate transducer is suited for the continuous measurement of the speed of flow of neutral or weakly aggressive liquids carrying a low amount of solid matter. Flow rates of 0.3 to 10 m/s can be measured.
The measured value transducer provides a frequency pulse signal. Standardized fittings ensure simple installation of the transducer into DN15 to DN400 pipes/tubes (see data sheet 40.6090).
Documentation
Datablad
Bruksanvisning
Produktinformasjon
Tysk JUMO flow measurement - MID flow transmitter, paddlewheel flow sensor (409,3 kB)
Engelsk JUMO flow measurement - MID flow transmitter, paddlewheel flow sensor (380 kB)
Fransk JUMO flow measurement - MID flow transmitter, paddlewheel flow sensor (432,4 kB)
Svensk JUMO flow measurement - MID flow transmitter, paddlewheel flow sensor (387,7 kB)
Brosjyre
Ihr Weg zum Produkt