More than sensors+automation
Søk
JUMO AS

Postboks 210
1471 Lørenskog
Norge

Telefon: +4767973710
Fax: +4767973711
e-mail: mail(at)jumo(dot)net

JUMO dTRANS T03 2-wire/3-wire transmitters (707030)

Funksjons

  • Designs for B, J head or installation on a top hat rail
  • PT100 (2-wire, 3-wire connection)
  • Analog measured value processing
  • Lowest measuring range 25 Kelvin
  • Output 2-wire 4..20mA 3-wire 0..10V
  • Version can be calibrated / configured
  • Measuring circuit monitoring NAMUR NE 43
  • Precise calibration / configuration via setup program

Beskriving

The transmitters intended for the industrial use detect the temperature with an RTD temperature probe Pt100 in 2-wire or 3-wire connection (Pt1000 linearization on request). The output signal 4...20 mA is provided temperature linear. The continuous analog signal path allows for extraordinary quick output reaction times in the event of a temperature change (analog permanent measurement instead of digital measuring rate).
This results in a low-noise and interference resistant output signal. Maximum precision, even for small measuring ranges, is ensured by measuring range specific gain. The digital communication allows the adaptation of the transmitters to the measuring task (measuring range, probe break and precise adjustment).
Two device versions are available meeting the requirements:

  • Devices equipped with the basic type extension 880/990 (adjustable). The transmitters are adjusted to a fixed measuring range, however, they can be adjusted to a different measuring range via the PC setup program in conjunction with a probe simulation.
  • Devices equipped with the basic type extension 881/991 (configurable). The desired measuring range is configured with the PC setup program without probe simulation and measurement.

Software

Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.

Artikkelnummer Produkt beskrivelse Price of the full version
00397093

Download (8.6 MB)

additional information...
På förfrågan
Tilbehør

Tilbehør artikler

Artikkelnummer Produkt beskrivelse Priser
fästelement för DIN-skena BET På förfrågan
PC-gränssnitt mit omvandlare USB/SPI På förfrågan
Artikkelnummer Produkt beskrivelse Priser

Typ: JUMO dTRANS T03 J analog tvåtråd-mätomv. till inst. in ansl.huv. form J

Grundutförande: balanserbar

MÄTINGåNG: Pt100 zl

UTGåNG: 4..20mA stabil

På förfrågan

Typ: JUMO dTRANS T03 B analog tvåtråd-mätomv. till inst. in ansl.huv. form B

Grundutförande: balanserbar

MÄTINGåNG: Pt100 dl

UTGåNG: 4..20mA stabil

På förfrågan

Typ: JUMO dTRANS T03 B analog tvåtråd-mätomv. till inst. in ansl.huv. form B

Grundutförande: balanserbar

MÄTINGåNG: Pt100 dl

UTGåNG: 4..20mA stabil

På förfrågan

Typ: JUMO dTRANS T03 T analog tvåtråd-mätomv. för monter. av bärskena

Grundutförande: balanserbar

MÄTINGåNG: Pt100 dl

UTGåNG: 4..20mA stabil

På förfrågan

Typ: JUMO dTRANS T03 J analog tvåtråd-mätomv. till inst. in ansl.huv. form J

Grundutförande: konfigurierbar

MÄTINGåNG: Pt100 zl

UTGåNG: 4..20mA stabil

På förfrågan

Typ: JUMO dTRANS T03 B analog tvåtråd-mätomv. till inst. in ansl.huv. form B

Grundutförande: konfigurierbar

MÄTINGåNG: Pt100 dl

UTGåNG: 4..20mA stabil

På förfrågan