JUMO mTRON relay module (70.4015)

The assembly group is a module of the JUMO mTRON control and automation system. The case in the format 91mm x 85.5mm x 73.5mm (W x H x D) is made of plastic and is installed on a top hat rail. Limit value monitoring cycles with delay links and self-retention are possible in addition to direct control via binary network variables. It is also possible to convert continuous control signals to nearly continuous pulse sequences to control actuators. For this purpose, functions such as pulse with modulation, pulse frequency modulation as well as adjustment controller are provided. The module is equipped with a total of four switching outputs (relay, binary or solid-state relay), that can be controlled via the LON bus. For the communication and for data exchange, the module is equipped with a network connection. A screened, twisted pair cable is used as the transmission line. A setup interface is provided for parameterization and configuration of the module via a PC under the project planning software JUMO mTRON-iTOOL. Electrical connection is carried out via plug-type screw terminal strips.

Tilbehør artikler