RTD surface temperature probe with connection cable (90.2550)

Funksjons

For temperatures from -50...+260°C
With protective fittings made of various materials
Easy and quick installation
Low thermal mass

Applikasjoner

For temperature measurements on closed pipe systems or other circular and flat surfaces
Versions with hole allow additionally the screw-fitting to any surface, e.g. on heating platens

Beskriving

RTD surface temperature probes with connection line are used for measuring temperatures on closed pipe systems and/or other round or level surfaces. There is no necessity for mechanical modification of the measurement location due to the easy installation via cable ties. The basic versions 902550/10 and 902550/11 provided with a hole for screw-fitting to any surfaces such as, e.g. heating platens are the exception.
An advantage to the indirect method of temperature measurement is that disruption of the flow stream is avoided. Additionally, the life of the RTD is not shortened by the effects of either pressure or chemicals.
The low thermal mass of the sensor means that there is very little influence of the sensor on the measured object. Thermal conductance paste is available to improve heat transfer. Large differences in temperature between the measured medium and the surrounding ambient air will influence the measurement. In such cases, we recommend additional insulation around the sensor.
The measuring insert is a Pt 100 temperature probe as per DIN EN 60 751, class B in 2-wire circuit as standard. Versions with Pt 500 or Pt 1000 are also possible.

Documentation

Datablad

Tysk (128,3 kB) Engelsk (130,2 kB) Fransk (132,6 kB) Kinesisk (174,3 kB) Dansk (127 kB) Russisk (272,9 kB) Tsjekkisk, Slovakisk (307 kB) Spansk (122,1 kB) Tyrkisk (417,8 kB)

Brosjyre

Tysk Plastics and packaging technology (2,2 MB) Tysk Temperature (3,5 MB) Engelsk Plastics and packaging technology (2,2 MB) Engelsk Temperature (3,5 MB) Fransk Temperature Measurement Technology (1.597,1 kB) Nederlandsk Packaging Industry (744,7 kB) Tsjekkisk, Slovakisk snímače teploty a vlhkosti (1.177,1 kB) Spansk Temperature Measurement Technology (2,3 MB)

Grunnleggende

Tysk Connection diagrams for RTD temperature probes and Thermocouples (94,8 kB) Tysk Construction and application of RTD temperature probes (1.768,5 kB) Engelsk Connection diagrams for RTD temperature probes and Thermocouples (96,4 kB) Engelsk Construction and application of RTD temperature probes (1.841,1 kB) Fransk Connection diagrams for RTD temperature probes and Thermocouples (97,5 kB) Fransk Construction and application of RTD temperature probes (1.161,5 kB) Dansk Connection diagrams for RTD temperature probes and Thermocouples (86,5 kB) Dansk Construction and application of RTD temperature probes (733,2 kB) Tsjekkisk, Slovakisk Connection diagrams for RTD temperature probes and Thermocouples (515,9 kB) Spansk Connection diagrams for RTD temperature probes and Thermocouples (125,1 kB) Spansk Construction and application of RTD temperature probes (1.672,5 kB) Tyrkisk Connection diagrams for RTD temperature probes and Thermocouples (57,1 kB)

Tilbehør

Tilbehør artikler

Artikkelnummer	Produkt beskrivelse	Priser
00493675	Montagesatz (Spannband und Waermeleitpaste) fuer Rohre bis max. 100 mm Durchmesser	På förfrågan

Artikkelnummer	Produkt beskrivelse	Priser
00065531	Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel, skyddsarmatur aluminium (25x50mm) INSTÄLLD TEMP.: -50..+180°C Mätinsats: 1x Pt 100 i 2-ledare KABELLÄNGD: 2500 Typtillsats knäckskyddsfjäder: med kabelavlastnings-fjäder	På förfrågan
00065548	Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel och fästborrning, skyddsarmatur rostfritt INSTÄLLD TEMP.: -50..+260°C Mätinsats: 1x Pt 100 i 2-ledare KABELLÄNGD: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats	På förfrågan
00306774	Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel och fästborrning skyddsarmatur aluminium INSTÄLLD TEMP.: -50..+260°C Mätinsats: 1x Pt 100 i 2-ledare KABELLÄNGD: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats	På förfrågan
00507000	Typ med komplettering: anläggnings-motståndstermometer med anslutningskabel, skyddsarmatur aluminium (D10x26mm) INSTÄLLD TEMP.: -50..+180°C Mätinsats: 1x Pt 100 i 2-ledare KABELLÄNGD: 2500 Typtillsats knäckskyddsfjäder: utan typtillsats	På förfrågan

JUMO AS