More than sensors+automation
Søk
JUMO AS

Postboks 210
1471 Lørenskog
Norge

Telefon: +4767973710
Fax: +4767973711
e-mail: mail(at)jumo(dot)net

JUMO Wtrans receiver for RTD temperature probes with wireless transmission of the measured values (90.2931)

Funksjons

  • For measured temperatures between -200 ... +600°C
  • RS485 interface with Modbus protocol
  • Wireless measured value reception
  • No wiring necessary thanks to modern radio technology
  • For max. 16 transmitters per receiver

Beskriving

The Wtrans receiver T01 is used in connection with corresponding Wtrans probes for mobile and stationary temperature measurement. A significant reduction of the installation work is achieved due to the application of the trendsetting radio technology in the ISM band (Industrial, Scientific and Medical Band) 868.4MHz or 915MHz. Cable connections are not required, the radio-based temperature sensor technology also functions in a rough industrial environment.
The supplied lambda/4-antenna with an impedance of 50 ohm can be directly screwed on or fitted externally. When using the antenna wall holder with the 3 meter long antenna cable, the maximum open air range is 300 m. The measured temperature values received are converted in the receiver, displayed and are available as temperature linear poser or voltage signals (0(4) ... 20 mA, 0 ... 10V) and via the digital interface RS485. All receiver outputs are electrically isolated from each other.
The connection to higher-ranking systems, e.g. the device visualization software JUMO SVS3000 or the Modbus master compatible paperless recorder JUMO LOGOSCREEN nt, is possible via the digital interface with Modbus protocol.
Operation and configuration is possible via the keyboard in connection with a 2-line LCD display or, more comfortable, using a set-up program. Thus, parameters such as filter constants, offset, alarms and fly back (minimum and maximum value memory) can be separately set for each channel. For this purpose, a plug is provided on the front for a PC interface with TTL/RS232 or USB/TTL converter to connect the receiver and the PC. The receiver in the mounting rail housing is intended for fitting on a top hat rail 35mm x 7.5mm according to DIN EN 60 715.

Here youcan seehow easily the JUMO Wtrans system can be configured.

Documentation
Datablad
Bruksanvisning
Interface beskrivelse
Produktinformasjon
Brosjyre
Tekniske artikler
Konformitetserklæring / teknisk dokument
Lagersalg Sertifikat
Sertifikat
Tilbehør

Tilbehør artikler

Artikkelnummer Produkt beskrivelse Priser
PC-gränssnitt mit omvandlare RS232/TTL På förfrågan
Steckernetzteil 600mA 3-12V MW3N06GS På förfrågan
I-7520A - RS232 till RS422/485 På förfrågan
Moxa CP-132i - gränssnitt: 2xRS422/485 På förfrågan
PC-gränssnitt mit omvandlare USB/TTL På förfrågan
Antennenleitung, Laenge 3 m, Impedanz 50 Ohm mit vorkonfektioniertem Schraubverbinder, Tmax. 85 °C På förfrågan
Antennen-Wandhalter mit Gegenpol fuer Lambda/4-Antenne På förfrågan
Antennenleitung, Laenge 5 m, Impedanz 50 Ohm mit vorkonfektioniertem Schraubverbinder, Tmax. 85 °C På förfrågan
Antennenleitung, Laenge 10 m, Impedanz 50 Ohm mit vorkonfektioniertem Schraubverbinder, Tmax. 85 °C På förfrågan
zusaetzliche Lambda/4-Antenne, Impedanz 50 Ohm, 868,4 MHz, Tmax. 125 °C På förfrågan
zusaetzliche Lambda/4-Antenne, Impedanz 50 Ohm, 915 MHz, Tmax. 125 °C På förfrågan
Antennenleitung, Laenge 10 m, Impedanz 50 Ohm mit vorkonfektioniertem Schraubverbinder, Tmax. 125°C På förfrågan
Lambda/4-Antenne mit fester und wasserdichter Leitung, Laenge 10 m, 868,4 MHz, Tmax. 125°C På förfrågan
Lambda/4-Antenne mit fester und wasserdichter Leitung, Laenge 20 m, 868,4 MHz, Tmax. 125°C På förfrågan
Artikkelnummer Produkt beskrivelse Priser

Typ med komplettering: WTrans-mottagare T01.EC1 för motståndstermometer med trådlös mätvärdesöverföring, 4x analoga utgångar

Utförande: fabriksinställning

Sende-/Empfangsfrequenz: 868,4 MHz (Europa)

Spänningsförs: AC 110..240V +10/-15%,48..63Hz

På förfrågan