JUMO DICON 401/501 - Universal Program Controller / Program Generator (703580)

The program controller/program generator is available in the formats 96 mm × 96 mm and 96 mm × 48 mm (portrait and landscape format). The devices are equipped with two four-digit seven-segment displays, five or eight LEDs as switching and operating mode indicators, one eight-digit matrix display as well as six keys for operation and configuration. The user can use the slots of the program controller according to the block diagram. 10 programs with up to 100 segments can be programmed; a total of 100 segments are possible. A self-optimization, a parameter block switch, a real time clock, up to eight limit value monitoring cycles, and up to eight control contacts are available as additional functions. The linearizations of the common measuring probes are stored, programming of a customer-specific linearization table is possible. A math module allows program controllers to be adapted to a wide variety of tasks. The devices can be integrated into a data network or extended by an external relay module via a serial interface. A setup program with program editor is available for straight-forward configuration on a PC. The electrical connection occurs at the back with screw terminals.

Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.

Tilbehør artikler