JUMO dTRANS CR 02 - Compact multichannel transmitter/controller for conductivity, TDS, resistance, standard signals, and temperature (202552)

The JUMO dTRANS CR 02 is a compact, modular instrument, that has the flexibility (with 3 slots, optional boards, etc.,) to accomplish a wide range of tasks. The main input
of the JUMO dTRANS CR 02 is used for sensors for measuring electrolytic conductivity, specific resistance, or the TDS value. Both conductive two-electrode and
four-electrode measuring cells can be connected to the instrument. The second analog input (compensating input) is designed for Pt100 and Pt1000 resistance
thermometers, NTC/PTC, or 0(4) to 20 mA and 0 to 10 V standard signals. The two binary inputs can be used both as the initiators for actions (such as HOLD, keyboard inhibit)
and for flow rate measurement, when pulse generators (such as impeller sensors) are connected. The high-contrast graphic display allows the input signals to be realized
by numbers or as a bar graph. Parameters are displayed in plain text for easily comprehensible and secure operation.
The JUMO dTRANS CR 02 can be used as a two-point or three-point controller, a three-point modulating controller, or as a continuous controller. All controller outputs can be configured for
P, PI, PD or PID action. The controller software includes parameter set selection and a math module.
A setup program is available for convenient configuration via a PC. The instrument can be integrated into a data network by means of an RS422/RS485 or PROFIBUS-DP
interface. Screw terminals on the back are used for the electrical connection.

Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.

Tilbehør artikler